Rivet Buster

Pneumatic Rivet Buster Manufacturers

Home / Rivet Buster

We are one of the leading  Pneumatic Rivet Buster Manufacturers in Kolkata, West Bengal. This is heavy duty, powerful hammer which gives excellent performance. It provides superb control on blow frequency and energy.

Our offered Rivet Buster is available in 8” or 11” stroke range with “D” handle and “P” handle which again corresponds to amount of blows per minute vs. power per each blow. 8″ and 11″ Stroke RK 4611 are originally designed for cutting and forming metal rivets, the RK buster is now used for concrete demolition and has become one of the stars of the RK range. It has a low frequency blow with hitting power equivalent to a paving breaker of twice its weight. The RK 4611 busters offer one of the best power-to-weight ratio on the market, together with a teasing throttle for precise control. Originally designed for removing rivets and other various metal applications, it is now also used for concrete demolition work since it has approximately the same hitting power as a 60lbs (30Kg) breaker for half its weight.

This tool is most suitable for medium to heavy concrete demolition, cutting large rivets and bolts, and other cutting and ripping operations. This tool has pistol grip handle are suitable for horizontal work and some vertical work. A pistol grip has an outside push trigger. Bridge deck work, where weight of breakers is restricted. De-Capping foundation pillars, where concrete is very hard. Cutting metal tanks or plates. Foundries or the petrochemical industry. Cutting and removing large rivets and bolts. Medium to heavy concrete demolition. This tool is used as an alternative to paving breakers where high hitting power is required but applied in a restrained space or working horizontally.

Features:

  • Auto Stop System – reduces sleeve breakage and cylinder wear.
  • Solid Pin on Valve – The solid pin in the valve block will eliminate valve misalignment.
  • 1/2″ Pipe Thread Inlet Bushing – Swivel can now be installed into bushing rather than in handle.
  • Longer Piston – The longer piston will hit the steel, but never hit the bridge. The retainer spring will break long before the cylinder or back handle can be damaged.
  • Lower Sleeve Marking to Change Bumper
  • New Rubber Bumper – 90 durometer rubber recommended.
  • Fluorescent Band – For night safety and dusk to dawn applications.
  • Teasing Throttle – Smooth performance and easy operator control.

Specification:

Model Name & Number RK 4611
Weight 15,0 Kg
Length 660 mm
Air consumption 21 l/s
Air inlet 1/2′ NPTF inch
Stroke 279 mm
Blows per minute 720
Handle type Pistol grip
Retainer type Spring type
Vibration level 3 axes (ISO 20643) 13,3 m/sec²